 |
 |
|
|
|
|
Installation Instructions
Included Parts: Two (2) PicnicWheels Assemblies, Eight (8) #14 x 1” Wood Screws, PicnicWheels Cord, Instruction Sheet and Drill Guide
Tools Needed: Medium Philips screwdriver, 1/8” diameter drill, one (1) brick or similar sized block
1. Fold drill guide along dotted line.
2. Lift one side of picnic table and slide drill guide under leg.
3. Drill four (4) 1/8” diameter pilot holes into picnic table leg.
4. Remove drill guide (Do Not Discard).
5. Lift picnic table up and slide a brick or similar sized item under the picnic table leg.
6. Attach the PicnicWheel to leg using four (4) screws provided (Do Not Over Tighten Screws).
7. Repeat steps 2 – 6 for the other end of the picnic table.
8. Attach the PicnicWheels Cord onto the middle of the opposite bench by passing the cord around the
picnic bench and then passing the plastic handle the hoop and pull tight.
Operating Instructions
1. Lift the picnic table using the bench or optional PicnicWheels Cord on the opposite side of the PicnicWheels.
2. Pull table to desired location.
3. Sit and enjoy!
Order Now For Only $25.99 + Shipping & Handling